Interlockings
The interlockings controlled by Swindon Panel have a standard circuitry design known as BR(WR) E10k, derived from the reference number of the series of drawings describing this design (E10000 series). It is a freewired interlocking design (Western Region never used geographical interlockings). The term 'freewired' means that all of the interlocking is bespoke to its particular location, consisting of individual relays wired together to suit that particular application. By contrast, a geographical interlocking consists of pre-wired generic packs of relays which are combined together like building blocks to build up the interlocking. Geographical interlockings are quicker to install and require less on-site testing but as not all of the available functions in each relay pack may be required there can be considerable redundancy. The wasted expenditure of this redundancy and the higher initial cost of pre-packaged units has to be balanced against the savings in installation and testing costs. Western Region decided that, in their opinion, freewired interlockings provided better value for money.
The first E10k interlocking was installed at West Ealing in 1955. The panel at West Ealing was supplied by MV-GRS to their standard NX Turn-Push design and the E10k interlocking system was influenced by MV-GRS interlocking practice.
The table below shows the interlockings in the Swindon Panel area:
| Interlocking | Site Code | Type | Controlled | Distance from Panel Box |
Commissioned | De-commissioned |
|---|---|---|---|---|---|---|
| Uffington | S.277 | BR(WR) E10k Freewired | Electronic Link | 10 3/4 miles | 30 May 1965[1] | Extant |
| Bourton | S.280 | BR(WR) E10k Freewired | Electronic Link | 01 October 1977[1] | Extant | |
| South Marston | S.282 | BR(WR) E10k Freewired | Electronic Link | 11 June 2000[1] | Extant | |
| Highworth | S.283 | BR(WR) E10k Freewired | Direct | 1 mile | 03 March 1968[1] | Extant |
| Swindon | S.296 | BR(WR) E10k Freewired | Direct | At Panel Box | 03 March 1968[1] | Extant |
| Wootton Bassett East | S.306 | BR(WR) E10k Freewired | Direct / Converted to Remove Control ~2010 | 6 miles | 23 March 1968[1] | Extant |
| Chippenham | S.318 | BR(WR) E10k Freewired | Electronic Link | 16 1/2 miles | 23 March 1968[1] | Extant |
| Thingley Jcn | BR(WR) E10k Freewired | Electronic Link | 19 miles | 23 March 1968[1] | 11 February 1975 | |
| Thingley | S.320 | BR(WR) E10k Freewired | Electronic Link | 11 February 1975[1] | Extant | |
| Wootton Bassett West | S.308 | BR(WR) E10k Freewired | Electronic Link | ca. early 1980[1] | Extant | |
| Hullavington | S.313 | BR(WR) E10k Freewired | Electronic Link | 17 miles | 23 March 1968[1] | Extant |
| Kemble | S.332 | BR(WR) E10k Freewired | Electronic Link | 13 3/4 miles | 27 July 1968[2] | 0108 19 August 2014[3] |
The Uffington interlocking was commissioned before Swindon Panel came into existence as it was originally controlled by Uffington signal box. It migrated to control by Swindon Panel on 3 March 1968.
The Swindon interlocking is located at the signal box with the panel and is controlled directly. All the other interlockings are sited at their geographical locations, remote from Swindon Panel, and are controlled through remote control systems.
A small interlocking at Minety, controlled from Minety Crossing Box, existed by 27 July 1968 until 09 August 2014 (when the crossing was converted to CCTV).
A small interlocking at Purton, controlled from Purton Crossing, existed by 27 July 1968 and has since been abolished.
Panel Indications of Remote Control Boundaries
In the case of remote control failure a single white route light flashes on each line at the boundary of the failure. A single white light is shared between adjacent interlockings and flashes when the remote control either side fails.
The lights are:
| Between | And | Line | White lights |
|---|---|---|---|
| Swindon B | Uffington | Down Main | East end (SB)PV[4] End of panel |
| Up Main | East end (SB)TB-TE[4] End of panel | ||
| Uffington | Bourton | Down Main | West end AM[5] |
| Up Main | West end KO[5] | ||
| Bourton | South Marston | Down Main | East end AT[6] |
| Up Main | East end KG[6] | ||
| South Marston | Swindon | Down Main | West end XD[7] |
| Up Main | West end YA[7] | ||
| South Marston | (Euroterminal) | Goods Reception | West end ZA (End of indications)[7] |
| Swindon | Wootton Bassett East | Down Main | (See notes) |
| Up Main | |||
| Wootton Bassett East | Chippenham | Down Main | East end CH[8] |
| Up Main | East end HK[8] | ||
| Chippenham | Thingley | Down Main | West end CP[8] |
| Up Main | East end HE[8] | ||
| Thingley | Bathampton | Down Main | West end (B)AC-XG[8] End of panel. |
| Up Main | West end GX[8] End of panel | ||
| Thingley | Bradford Jn | Single | West end (W)RJ/ETC[8] End of panel. |
| Wootton Bassett East | Wootton Bassett West | Down Badminton | |
| Up Badminton | |||
| Wootton Bassett West | Hullavington | Down Badminton | |
| Up Badminton | |||
| Hullavington | Chipping Sodbury | Down Badminton | West end DB101-(B)SG End of panel |
| Up Badminton | West end UB96 End of panel. | ||
| Swindon | Kemble | Single | |
| Kemble | Standish | Down Kemble | West end (G)PT |
| Up Kemble | West end (G)PS |
Swindon <> Wootton Bassett East - Wootton Bassett East used to be direct wired, but latterly was controlled by Remote Control. Not sure if indication lamps were fitted at the boundary....
Related Documents
References
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 British Power Signalling Register (http://www.bpsr.org.uk)
- ↑ K2 Week 30 1968
- ↑ Swindon Panel Occurrence Book
- ↑ 4.0 4.1 SPS Photo site: https://flic.kr/p/pqax6X
- ↑ 5.0 5.1 SPS Photo site: https://flic.kr/p/p8EDbb
- ↑ 6.0 6.1 SPS Photo site: https://flic.kr/p/po8z3Q
- ↑ 7.0 7.1 7.2 SPS Photo site: https://flic.kr/p/p8FEyg
- ↑ 8.0 8.1 8.2 8.3 8.4 8.5 8.6 SPS Photo site: https://flic.kr/p/p8FDKn
Researchers compiling pages - please see the Research Guidance - Routes